Dual fuel use (Electric & Central Heating system) with 1x T-pipe- Pipes from Floor

Type of use: Central heating water system & Electric
Position of pipes: Pipes come from the floor
Parts Required: 1x Angled valve, 1x Straight valve (thermostatic or standard), 1x Heating element and 1x T-pipe

Installation guide: This type of use must be installed by a qualified & certified electrician! It is highly recommended that you contact your electrician for more information before purchasing a heating element and getting advice where you can install this type of electric use within your house.

The head unit (if it is a thermostatic valve) must be installed either the left or the right inlet pipe, depending on where the hot water is flowing in. The connection must be always made from the bottom inlet points of the towel radiator.

The heating element must never be turned on without first filling the towel radiator with water as it can cause the element to burn out. When towel radiator is heated by using central water heating system, the heating element must be turned off! Heating element and the central heating system can never be run at the same time.

Please note that,
*None of our heating elements come with an electric plug.
*All electric elements must be installed and (or) wired by a trained and certified electrician.
*All electric towel radiators must be filled with water.
*All electric elements must be fully submerged in water.

Dual fuel use (Electric & Central Heating System) with 2x T-pipes- Pipes from floor

Type of use: Central and electric heating systems
Position of pipes: Pipes come from the floor
Parts Required: 1x Pair of angled valves, 1x Heating Element (standard or thermostatic or electronic thermostatic), 2x T-pipes and 1x Blanking plug

Installation guide: This type of heating system must be installed by a qualified and certified electrician! It is highly recommended that you contact your electrician for more information before purchasing a heating element and getting advice where you can install this type of electric use within your house. The head unit (if it is a thermostatic valve) must be installed either to the left or the right inlet pipe, depending on where the hot water is flowing in. The connection must always be made from the bottom inlet of the towel radiator.

The heating element must never be turned on without first filling the towel radiator with water as it can cause the element to burn out. When towel radiator is heated by using central water heating system, the heating element must be turned off! The heating element and the central heating system can never be run at the same time.

Please note that,
*None of our heating elements come with an electric plug.
*All electric elements must be installed and (or) wired by a trained and certified electrician.
*All electric towel radiators must be filled with water.
*All electric elements must be fully submerged in water.

Dual fuel use (Electric & Central Heating system) with 1x T-pipe- Pipes from wall

Type of use: Central heating system & Electric
Position of pipes: Pipes come from the wall
Parts Required: 1x Pair of angled valves, 1x Heating Element (standard, thermostatic or electric thermostatic) and 1x T-pipe

Installation guide: This type of use must be installed by a qualified & certified electrician! It is highly recommended that you contact your electrician for more information before purchasing a heating element and getting advice where you can install this type of electric use within your house.

The head unit (the valve) must be installed either the left or the right inlet pipe, depending on where the hot water is flowing in. The connection must be always made from the bottom inlet of the towel radiator.

The heating element must never be turned on without first filling the towel radiator with water as it can cause the element to burn out. When towel radiator is heated by using central water heating system, the heating element must be turned off! Heating element and the central heating system can never be run at the same time.

Please note that,
*None of our heating elements come with an electric plug.
*All electric elements must be installed and (or) wired by a trained and certified electrician.
*All electric towel radiators must be filled with water.
*All electric elements must be fully submerged in water.

Dual fuel (Electric & Central Water Heating system) with 2x T-pipes- Pipes from wall

Type of use: Central heating system & Electric
Position of pipes: Pipes come from the wall
Parts Required: 1x Pair of angled valves, 1x Heating element (standard, thermostatic or electric thermostatic), 2x T-pipes and 1x Blanking plug

Installation guide: This type of use must be installed by a qualified & certified electrician! It is highly recommended that you contact your electrician for more information before purchasing a heating element and getting advice where you can install this type of electric use within your house.

The head unit (the valve) must be installed either the left or the right inlet pipe, depending on where the hot water is flowing in. The connection must be always made from the bottom inlet of the towel radiator.

The heating element must never be turned on without first filling the towel radiator with water as it can cause the element to burn out. When towel radiator is heated by using central water heating system, the heating element must be turned off! Heating element and the central heating system can never be run at the same time.

Please note that,
*None of our heating elements come with an electric plug.
*All electric elements must be installed and (or) wired by a trained and certified electrician.
*All electric towel radiators must be filled with water.
*All electric elements must be fully submerged in water.